Spend over £120 and receive free next day delivery!

Job Guide – Wool – Heavily soiled Pub

Page Contents

Please note this is a salvage method for really trashed wool carpets in a commercial / industrial environment.

  • Mix Dragon Fire Pre-spray at 250ml per litre.
  • Apply a heavy amount of pre-spray to the carpet using overlapping passes.
  • Allow Pre-spray to sit on carpet for 15 minutes. During this time the product will break down soils.
  • Once dwell time is complete manual or mechanical scrubbing methods.
  • Rinse extract the chemical using Berserker high alkaline rinse, This should be mixed at 30ml per 10 litres in your clean water tank.
  • Make slow passes using your carpet cleaning wand and for every wet pass make sure you follow up with at least 2 dry passes. Ensure these passes are all uniform and no zig zagging occurs as uneven pile / Sharks teeth can set permanently into wool carpets and be extremely difficult to remove.
  • If any soiling remains repeat steps 1-6.
  • If the customer wants the carpet to last then Re-apply protective coating with Asgard Next generation protection at 1-1 for a long lasting dirt and hydrophobic barrier. This can be done wet or dry.

Pre-spray

250ML Per Litre

In tank

30 ML Per 10 Litres

Protection

1 Litre Per 1 Litres

Page Contents

Relevant products

asgard ceramic carpet protector

ASGARD – Woolsafe, Advanced Fabric Stain Guard

£29.95£149.95

Berserker heavy duty carpet detergent

BERSERKER- High Performance Detergent

£19.95£59.95

Dragon fire heavy duty carpet prespray

DRAGON FIRE- High Performance Pre-Spray

£19.95£59.95

BUY THE FULL BOOK OF NJORD INCLUDING 128 PAGES OF ....