Spend over £120 and receive free next day delivery!

Job Guide – Synthetic – Industrial carpets synthetic grease

Page Contents

  1. Mix Dragon Fire Pre-spray at 250ml per litre.
  2. Apply a heavy amount of pre-spray to the carpet using overlapping passes.
  3. Allow Pre-spray to sit on carpet for 15 minutes. During this time the product will break down soils.
  4. Once dwell time is complete manual or mechanical scrubbing methods – Although this is not always necessary.
  5. Rinse extract the chemical using Berserker high alkaline rinse, This should be mixed at 30ml per 10 litres in your clean water tank.
  6. Make slow passes using your cleaning wand and for every wet pass make sure you follow up with at least 2 dry passes. On Polypropylene and Polyester carpets zig zagging and sharks teeth will not permanently disrupt the pile, however for a professional finish leave in a uniform condition.
  7. Dragon Fire does not deodorise, premium deodoriser can be added to your rinse tank or alternatively sprayed lightly at the end.

Pre-spray

250ML Per Litre

In tank

30ML Per 10 Litres

Page Contents

Relevant products

Berserker detergent

BERSERKER- High Performance Detergent

£19.95£59.95

Dragon Fire - HIGH PH Solvent Pre-Spray from NJORD Chemicals UK

DRAGON FIRE- High Performance Pre-Spray

£19.95£59.95

BUY THE FULL BOOK OF NJORD INCLUDING 128 PAGES OF ....